I: Common fault analysis of stainless steel vibrating screen

　　1. Due to improper operation;

　　2. The mesh is blocked;

　　3. The increase of fine particles and the increase of moisture in the feed material make the upper layer of the vibrating screen too thick and the feeding is uneven;

　　Remarks: After the stainless steel vibrating screen has been processed, the vibrating screen can be reversed for a period of time. The mesh cleaning system can improve the screening quality of the vibrating screen.

　　II: Summary of common problems in stainless steel vibrating screen:

　　1. When the stainless steel vibrating screen is in normal operation, the vibrating screen rotates slowly and the bearing will heat up. When this happens, the normal maintenance of the stainless steel vibrating screen is not kept up, resulting in the lack of grease in the vibrating screen bearing.

　　2. If the stainless steel vibrating screen bearing is a new grease, it may be the quality problem of the grease or too full, the inferior oil will make the vibrating screen bearing block the labyrinth seal jam, so the quality of the vibrating screen grease is very important. .

　　3. The crack of the side plate of the stainless steel vibrating screen, the beam is broken, and the structural parts are damaged. This problem is caused by the working time of the vibrating screen at the critical frequency is too long.