We all know that a vibrating screen is a screening machinery that requires frequent continuous operation. Therefore, in order to ensure the normal operation of the equipment and a longer service life, daily inspection and troubleshooting are necessary. Next, we will teach you how to inspect a vibrating screen.

　　1. Firstly, the vibrating screen should be promptly cleaned internally after each use.

　　2. Carefully check whether the fastening bolts at each joint of the vibrating screen are loose. If there is any looseness, it needs to be tightened or replaced in a timely manner to avoid further operation.

　　Vibrating screen factory

　　3. Check if the wiring from the vibration motor to the switch is worn. If severe damage is found, replacement is also necessary.

　　4. In addition, it is necessary to check whether the mesh is tensioned and whether the mesh surface is damaged. If there is any damage, the mesh should be replaced in a timely manner.

　　5. Then check if there are any abnormal sounds or heating conditions in the motor. If it is abnormal, add lubricating oil or replace the bearings. In addition, the maintenance of the vibrating screen motor should be done by skilled technicians with professional knowledge.