Reasonable installation of swing screens can effectively extend the service life and production efficiency of equipment. So what are the issues to pay attention to when installing the swing screen? Swing screen manufacturers now take you to understand:

　　When installing the motor, it should be installed horizontally, and the surface should be kept flat and smooth. After the motor is installed, its firmness and reliability should be ensured, and the installation surface should also be kept smooth and flat, so as to ensure that people can use it more conveniently and simply.

　　When installing the swing screen, it is necessary to follow the installation drawings, and the supporting frame needs to be installed horizontally on the foundation, which should also have sufficient rigidity and strength to better support the entire load of the swing screen.

　　After installing the equipment, check whether the transportation support has been removed. The transportation support plays a role in protecting the screening machine during transportation. If it is not removed, the equipment will not operate normally, thereby affecting its service life.

　　The manufacturer of the swing screen reminds that maintenance work after installation is indispensable. After installing the swing screen, it is necessary to check whether each component of the equipment is normal. Check if the screen mesh is damaged, and if found, immediately contact the supplier.

　　Install the electric motor and triangular tape. When installing, the foundation of the motor should be leveled, the level of the motor needs to be calibrated, the center lines of the grooves corresponding to the two tape wheels should coincide, and the tension of the triangular tape should be appropriate.

　　Check the fixing condition of each connecting component of the sieve (such as sieve plate, exciter, etc.). The sieve should be evenly tensioned to prevent local vibration. Check the lubrication condition of the transmission part, whether the wiring of the motor and control box is correct, and manually rotate the transmission part to check if it is running normally.