新乡市振英机械设备有限公司

此页面上的内容需要较新版本的 Adobe Flash Player。

获取 Adobe Flash Player

    Cone crusher

     

    Description:

    Cone crusher is suitable to crush various kinds of ores and rocks of medium or above medium hardness. Compare with jaw crusher, cone crusher is of stable structure, high
    efficiency, easy adjustment, economic operation, etc. The spring safety system of crusher acts as an overloading protection system that allows metal to pass through the crushing chamber so as not to damage the cone crusher. The safety system uses dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separate to make sure reliable performance. The type of crushing
    chamber depends upon size of feeding and fineness of crushed product. The standard type (PYB) is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing 

    Working principle:

    Cone crusher crushes materials by the working surface between the movable cone and fixed cone. So it is more advanced and efficiency efficient than jaw crusher. The movable cone is supported by spherical bearing and fixed on an hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are driven by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fimbriated gear, and the wheel of the conveyor belt is driven by motor through v-belts. The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the movable cone leaves, grinded materials is discharged from the discharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole, consequently the output size is determined adjusted.

    Technical Parameters:

    Mode

    Cone Diameter
    (mm)

    Feeding particle size
    (mm)

    Exit adjustable scale
    (mm)

    Longest particles
    (mm)

    Process Capacity
    (t/h)

    Eccentric bushing
    rotation (r/min)

    Power
    (kw)

    Weight
    (t)

    YB600

    Ф 600

    75

    12-25

    65

    40

    356

    30

    5

    PYD600

    Ф 600

    40

    2-13

    35

    12-23

    356

    30

    5.5

    PYB900

    Ф 900

    135

    15-50

    115

    50-90

    333

    55

    11.2

    PYZ900

    Ф 900

    70

    5-20

    60

    20-65

    333

    55

    11.2

    PYD900

    Ф 900

    50

    3-13

    50

    15-50

    333

    55

    11.3

    PYB1200

    Ф 1200

    170

    20-50

    145

    110-168

    300

    110

    24.7

    PYZ1200

    Ф 1200

    115

    8-25

    100

    42-135

    300

    110

    25

    PYD1200

    Ф 1200

    60

    3-15

    50

    18-105

    300

    110

    25.3

    PYB1750

    Ф 1700

    250

    25-50

    215

    280-480

    245

    160

    50.3

    PYZ1750

    Ф 1700

    215

    10-30

    185

    115-320

    245

    160

    50.3

    PYD1750

    Ф 1700

    100

    5-13

    85

    75-230

    245

    160

    50.2

    PYB2200

    Ф 2200

    350

    30-60

    300

    590-1000

    220

    280/260

    80

    PYZ2200

    Ф 2200

    275

    10-30

    230

    200-580

    220

    280/260

    80

    PYD2200

    Ф 2200

    130

    5-15

    100

    120-340

    220

    280/260

    81.4

     

     

Chat with me  Rachel