新乡市振英机械设备有限公司

此页面上的内容需要较新版本的 Adobe Flash Player。

获取 Adobe Flash Player

vibrating screenFAQ(3)


Questions about Motor

1. What's the wearing parts of the motor?
A:The wearing part is bearing.We use American UBC Bearing free of oil-injection featuring long span life.

2.Is the coil will bad ?
The rotor and stator will not bad.

3. How to solve the problem of the motor's angle ?
According to the features of the materials,adjust the angle of upper and the lower heavy hammer: 15°-90 °.The bigger the angle is,the more the materials converge towards the centre;the smaller the angle is,the faster the materials disperse outwards.

4.What's the influence of the base's screw ?
It will be helpful for the adjustment of the motor's angle.The disctance between the screws are equal.


After sales service


1.Q :How to install and configure ZYD seires vibrating screen?
A:Very easy, we have served thousands of customers home and abroad,when delivering the machine,a video manual is attached.You also can visit our website for the video:http://www.cnzymachinery.com/video.php

2. Q:1.Do you have any service man or representative?
A: Our firm is rapidly expanding now.But it still needs some time for us to set up service centre in different countries.So far,we mainly use the following way for aftersales service:firstly a professional English video about adjustment and operation would be matched with the machine. Secondly: the sales person can service you good after sales, 24 hours calling and professional engineers can solve the normal sieving problem.Thirdly:our machine 's warranty is 13 months (from the date from our factory),except the quick-wear part, such as: screen mesh, vibrating motor(13 months' warranty) etc.Thirdly,for big orders,technician can be dispatched when needed.

3. Q:What in case of fitting of machine or repairing of the machine?
A:Just like our answer in NO.1.The process of fitting and repairing,you can refer to the video and our usage manual.

4.Q:Do you have any other satisfied customers in India?
Yes,we do.East India Mining Co. is our good client. They are in charge of Mining Industry.They just purchased the linear vibrating screen machine from us.Of course ,we also have other customers in your country. 

5.What countries have you exported to?A.America,Australia,Spain,Greece,France,Chech,Austria,Turkey,UAE,Singapore,vitnam,Srilank,Peru.India,Maylasia,Korea,Indonesia,Malasia,Ghana,congo.South Africa, Kenya etc.


Special design


1.Q: Also, we need the equipment to be mobile, moving from one room to another room. Can you do it?
A: Yes. we can. Add wheels to the bottom.

2. Q: Can you provide a hood on the top cover to enable us to connect a blower to suck out the dust? Please refer to the drawing as my required? The inlet’s diameter is 3 inch, a height of about 5.5 feet.
   A:  Yes, we can.A hole beside the inlet can be left for you to install a blower for the solving of environment protection.

 3.Q: Could the outlet spouts be arranged so that they can be collected in 50 Kg bags at the side of the machine and could there be a valve provided so that we can close the valve to remove the filled bag and place a fresh one without the powder spilling on the floor.
   A:.About your problem,a rubber flexible connection can be deviced into the outlet.Valve can be installed on the inside of the outlet.This is quite usual design from our customer.  
 4.Q:Could you design a hopper on the inlet?

Yes,we can.we have clients needing laosong style rectangular hopper.we ever designed it.

5.Q:For ZYSZ ,The distance of 40mm is too small …minimum distance should be 100mm.
A;the distance of the two net rack can be designed to 100 mm.At the same time ,the cost of machine will be arised.As you know,the difference of 60mm means the around plank of screen frame will be increased

Chat with me  Rachel